Good Prices Cold Rolled Z Type Steel Sheet Piles Z Section Z-Profile Sheet Pile
Sheet piles are used in earth retaining structures where a differential surface level is to be established. The sheet pile forms the vertical interface.
Z-profiles are used for intermediate to deep wall construction as they are considered to be the most efficient type of sheet pile available. They are commonly used for cantilever and tied-back retaining wall systems.
Cold formed Z profile sheet piles are manufactured primarily used for reinforcing dams and river or canal banks. They are also used for containment barriers in contaminated land and as noise barriers when sound absorbent facing is attached to the front of the pile.
Standard: BS EN 10249.
Typical steel grades: S235 JRC to S355 JRC etc.
Advantages of cold formed sheet piles
The main advantage of cold formed sheet piles is the simple and economical production process, compared with hot rolling. The effect is not only a more affordable price but also:
higher flexibility of production, allowing a just-in-time delivery
customer-tailored solutions
customized manufacturing with exactly the dimension (length and thickness) needed
almost no waste of material
cost saving
Delivery Options:
*Single or Pairs
*Pairs either loose, welded or crimped
*Lifting Hole
*By container (11.8m or less) or Break Bulk
*Corrosion Protection Coatings
Our piles have CE and EN certification and have been regularly exported to Europe and Australia.
Sectional Properties Examples
| Width | Height | Thickness-t | Thickness-s | Mass per Pile | Mass Wall | Modulus of section | Moment of Inertia |
| mm | mm | mm | mm | kg/m | kg/m2 | cm3/m | cm4/m |
| 770 | 344 | 8.5 | 8.5 | 72.6 | 94 | 1245 | 21430 |
| 770 | 344 | 9.0 | 9.0 | 76.1 | 99 | 1300 | 22360 |
| 770 | 345 | 9.5 | 9.5 | 79.5 | 103 | 1355 | 23300 |
| 770 | 345 | 10.0 | 10.0 | 82.9 | 108 | 1405 | 24240 |
| 700 | 314 | 8.5 | 8.5 | 67.7 | 96 7 | 1205 | 18880 |
| 700 | 315 | 9.5 | 9.5 | 74.0 | 105.7 | 1305 | 20540 |
| 700 | 316 | 10.0 | 10.0 | 77.2 | 110 2 | 1355 | 21370 |
| 700 | 316 | 10.5 | 10.5 | 80.3 | 114.7 | 1405 | 22190 |
| 630 | 380 | 9.5 | 9.5 | 74.4 | 118 | 1800 | 34200 |
| 630 | 381 | 10.0 | 10.0 | 77.8 | 123 | 1870 | 35540 |
| 700 | 419 | 8.5 | 8.5 | 73 1 | 104 | 1730 | 36230 |
| 700 | 420 | 9.0 | 9.0 | 76.5 | 109 | 1800 | 37800 |
| 700 | 420 | 9.5 | 9.5 | 80 0 | 114 | 1870 | 39380 |
| 700 | 421 | 10.0 | 10.0 | 83.5 | 119 | 1945 | 40960 |
| 800 | 449 | 8.5 | 8.5 | 80.7 | 100.9 | 1840 | 41320 |
| 800 | 450 | 9.5 | 9.5 | 88.6 | 110.7 | 2000 | 45050 |
| 800 | 451 | 10.5 | 10.5 | 96.4 | 120,5 | 2165 | 48790 |
Detailed Product Images
Applications of cold formed sheet piles
Construction of docks and ports
Waterways
Breakwater
Protection of rivers banks and channels
Protection of construction pits in soil and water
Bridge embankments
Retaining walls
Foundations
Underground parking
Underpasses, ramps and tunnels
Slope protection
Environmental protection and rubbish dumps
Noise barriers
Enclosure of contaminated soils
Civil and industrial sites
Civil defense
Military engineering
Certificates
About Us - Hangzhou Famous Steel Engineering Co.,Ltd
Famous is a business unit of KNSN Group. Famous supplies to the global markets a wide variety of premium steel products for foundations : Z type, U type, Omega type, Trench, Flat web sheet piles, HZ combined walls, Tubular combined walls, tie-rods and accessories, in assortment of steel grades and production standards. A wide range of thicknesses and widths and depths are achievable at very moderate prices and committed to be shipped within the stipulated time frame.
If you have interest, please contact us for a quote.
Email: Eva@hfsteelstructure.com
Phone: +86-571-87688170; +86-13989831561
Product Tags:
|
|
Cold Rolled Z Type Steel Sheet Piles Z Section Z Profile Sheet Pile Images
|
